All codes (2.974)

• 9330 Sercos axes not admitted with Mechatrolink axes CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 9331 No variables or DRV parameters are admitted with Mechatrolink I or Mechatrolink II at 17 bytes CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 9332 Remote COUNTERTYPE and COUNTERID 0 are incompatible with each other CNC 8058 / 8060 / 8065 · CNC 8070
• 9333 The Sercos hardware is not compatible with Mechatrolink axes CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 9334 The Mechatrolink hardware is not compatible with Sercos axes CNC 8058 / 8060 / 8065 · CNC 8070
• 9335 The axis must have the same type of feedback in all the sets. CNC 8058 / 8060 / 8065 · CNC 8070
• 9336 Incompatible machine parameters CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 9337 Position-Sercos does not work with LOOPTIME greater than 8 ms. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 9338 Insufficient memory. Reduce the value of the parameter. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 9339 SWTDELAY value too high for current LOOPTIME. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 9340 Sercos counter: sets with same COUNTERID must have the same parameter(s): CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 9341 Sercos counter: the active set of several axes cannot have the same parameter ANAOUTID CNC 8058 / 8060 / 8065 · CNC 8070
• 9342 Kinematics offset out of the range allowed by the maximum value CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 9343 DRV variable already exists. CNC 8058 / 8060 / 8065 · CNC 8070
• 9344 DRV axis and node variables cannot have the same MNEMONIC. CNC 8070
• 9345 MLINK: DRV variables having the same ID and TYPE cannot have a different MNEMONIC. CNC 8058 / 8060 / 8065 · CNC 8070
• 9346 MLINK: DRV variables having the same ID and a different MNEMONIC cannot have a different MODE. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 9347 Axis repeated in VOLCOMP CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 9348 Adjustment of the rotary axis, (measured value=%d) outside the range allowed by the maximum value (V.K.MAXROTCOMP=%d) on the %s-axis. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 9349 Active axis SET feedback not connected. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 9350 Active axis SET motor not connected. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 9351 DEFAULTSET must match M41SET..M44SET for spindles. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 9352 CAXSET must match M41SET..M44SET for spindles. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 9353 SYNCSET must match M41SET..M44SET for spindles. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 9355 The master and slave axes must have the same OPMODE. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 9356 Ballscrew compensation defined twice. CNC 8058 / 8060 / 8065 · CNC 8070
• 9357 COMPAXIS axis for the selected compensation not valid. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 9358 Undefined compensation. CNC 8058 / 8060 / 8065 · CNC 8070
• 9360 Not possible to validate parameters for an axis undergoing gear change. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 9361 To change the number of channels, axes or spindles, the CNC must be restarted. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070