Error codes
Look up an error or alarm code from your Fagor CNC, drive or digital readout and see its cause and solution, with a link to the page in the manual.
All codes (4.799)
- 0001 Empty line CNC 8055 T
- 0001 Empty line CNC 8055 M
- 0001 SYSTEM ERROR CNC 8058 / 8060 / 8065 · CNC 8070
- 0001 SYSTEM ERROR. CNCelite 8058 / 8060 / 8065 / 8070
- 0002 Improper data CNC 8055 T
- 0002 Improper data CNC 8055 M
- 0002 SYSTEM WARNING CNC 8058 / 8060 / 8065 · CNC 8070
- 0002 SYSTEM WARNING. CNCelite 8058 / 8060 / 8065 / 8070
- 0003 Error when requesting memory. Restart Windows & CNC CNC 8058 / 8060 / 8065 · CNC 8070
- 0003 Error when requesting memory. Restart Windows & CNC. CNCelite 8058 / 8060 / 8065 / 8070
- 0003 Improper data order. CNC 8055 M · CNC 8055 T
- 0004 Checksum error in PLC data CNC 8058 / 8060 / 8065 · CNC 8070
- 0004 Checksum error in PLC data. CNCelite 8058 / 8060 / 8065 / 8070
- 0004 No more information allowed in the block. CNC 8055 T
- 0004 No more information allowed in the block. CNC 8055 M
- 0005 Repeated information CNC 8055 M · CNC 8055 T
- 0005 The CNC was not turned off properly, it must be homed CNC 8058 / 8060 / 8065 · CNC 8070
- 0005 The CNC was not turned off properly, it must be homed. CNCelite 8058 / 8060 / 8065 / 8070
- 0006 Improper data format CNC 8055 M · CNC 8055 T
- 0006 Preparation takes longer than half the cycle time. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 0007 Incompatible G functions. CNC 8055 M · CNC 8055 T
- 0007 To complete the reset, restart the CNC. CNC 8058 / 8060 / 8065 · CNC 8070
- 0007 To complete the reset, restart the CNC. CNCelite 8058 / 8060 / 8065 / 8070
- 0008 Nonexistent G function CNC 8055 M · CNC 8055 T
- 0008 The key has been rejected. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 0009 No more G functions allowed CNC 8055 T
- 0009 No more G functions allowed CNC 8055 M
- 0009 System warning: AEP fifo management failure. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 0010 Error when testing the RAM with battery CNC 8058 / 8060 / 8065 · CNC 8070
- 0010 Error when testing the RAM with battery. CNCelite 8058 / 8060 / 8065 / 8070
Log in to download
New to the platform?
Create an account
·
