CNC 8055 M CNC 8055 T

Error 0007 · CNC 8055 M · CNC 8055 T

Message: Incompatible G functions.

Detection

While editing at the CNC or while executing a program transmitted via DNC.

Cause

The possible causes are:

  1. When programming in the same block two "G" functions which are incompatible with each other.
  2. When trying to define a canned cycle in a block containing a nonlinear movement (G02, G03, G08, G09, G33).

Solution

The solution for each cause is:

  1. There are groups of "G" functions which cannot go together in the block because they involve actions incompatible with each other. For example:

G01/G02: Linear and circular interpolationG41/G42: Left-hand or right-hand tool radius compensation.

This type of functions must be programmed in different blocks.

  1. A canned cycle must be defined in a block containing a linear movement. In other words, to define a cycle, a "G00" or a "G01" must be active. Nonlinear movements (G02, G03, G08 and G09) may be defined in the blocks following the profiledefinition.

The same code on other products

·