Error 9337 · CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
Message: Position-Sercos does not work with LOOPTIME greater than 8 ms.
Detection
On CNC power-up or when validating the machine parameters.
Cause
The Sercos position drives have limited cycle time of 8 ms.
Solution
Assign the machine parameter LOOPTIME to a value equal to or lower than 8 ms or use the speed drives (OPMODE = Speed).
