All codes (895)

• 2028 SERCOS chip version error.’ Press any key. CNC 8055 M · CNC 8055 T
• 2030 Feedback over-current error. CNC 8055 M · CNC 8055 T
• 2034 There is no voltage at the I/O 4 board. CNC 8055 M · CNC 8055 T
• 2035 There is no voltage at the I/O 5 board. CNC 8055 M · CNC 8055 T
• 2036 The type of keyboard does not match the CNC model. CNC 8055 M
• 2037 24 V missing at the CPU-CNC module. CNC 8055 M
• 2041 Unsupported LCD type. CNC 8055 M
• 2042 It is recommended to lower the order of the frequency filter. CNC 8055 M · CNC 8055 T
• 2043 Parameters of the frequency filter set wrong. CNC 8055 M · CNC 8055 T
• 2045 G51 with FAGOR filters is incompatible with general parameter IPOTIME. CNC 8055 M · CNC 8055 T
• 2046 G51 with FAGOR filters is incompatible with parameter SMOTIME. CNC 8055 M
• 2047 G51 with FAGOR filters is incompatible with parameter TYPE. CNC 8055 M · CNC 8055 T
• 2048 Parameter TYPE=2 is incompatible with general parameter IPOTIME. CNC 8055 M · CNC 8055 T
• 2049 Parameter TYPE=2 is incompatible with general parameter SMOTIME. CNC 8055 M
• 2051 Too many feedback pulses. CNC 8055 M
• 2052 Too much real feedback difference. CNC 8055 M
• 2053 Error at the CNC parameters. CNC 8055 M · CNC 8055 T
• 3000 (PLC_ERR without description) CNC 8055 M · CNC 8055 T
• 3001 WATCHDOG in the main module (PRG). CNC 8055 M · CNC 8055 T
• 3002 WATCHDOG in the periodic module (PE). CNC 8055 M · CNC 8055 T
• 3003 Division by zero at the PLC CNC 8055 M · CNC 8055 T
• 3004 PLC error -> CNC 8055 M · CNC 8055 T
• 3005 Contacts debugging error CNC 8055 M · CNC 8055 T
• 3007 Configuration file corrupted CNC 8055 M · CNC 8055 T
• 3008 PLC program too large CNC 8055 M · CNC 8055 T
• 4000 Sercos ring error CNC 8055 M · CNC 8055 T
• 4001 Undefined class 1 error CNC 8055 M · CNC 8055 T
• 4002 Overload ( 201...203 ) CNC 8055 M
• 4003 Overtemperature at the drive ( 107 ) CNC 8055 M
• 4004 Overtemperature at the motor ( 108 ) CNC 8055 M