Error 2043 · CNC 8055 M · CNC 8055 T
Message: Parameters of the frequency filter set wrong.
Detection
On power-up or when pressing RESET after changing the value of some parameter of the filters.
Effect
It stops the movement of the axes and the spindle, eliminating all the enable signals and canceling all the analog outputs of the CNC. When detected from the position loop, it opens the position loop and sets the LOPEN mark to ·1·.
If it is in execution, it interrupts the execution of the part program of the CNC of its channel.
Besides this, it activates the external emergency output.
Cause
The parameters for the frequency or order of the filter are set wrong. If it is executed with these wrong parameter values, the filter will not be active.
Solution
Check the values for the frequency and order of the filter.
