All codes (4.799)

• 2515 #ORBIT ON: movement of the axis perpendicular to the plane not allowed. CNC 8058 / 8060 / 8065 · CNC 8070
• 2516 #CSn: ON/SAVE is expected. CNCelite 8058 / 8060 / 8065 / 8070
• 2517 #CS M3P: one of the points that define the plane has not been programmed (#CS P1..3). CNCelite 8058 / 8060 / 8065 / 8070
• 2518 #CS: valid tokens beginning with 'A', ALIGNX, ALIGNY. CNCelite 8058 / 8060 / 8065 / 8070
• 2519 #CS: valid token beginning with 'S', SOL2. CNCelite 8058 / 8060 / 8065 / 8070
• 2520 #CS: old syntax "#CS [MODE" not compatible with new syntax "#CS ON/ADD XYZ..". CNCelite 8058 / 8060 / 8065 / 8070
• 2521 #CS: only allows 3 rotations (RX, RY, RZ). CNCelite 8058 / 8060 / 8065 / 8070
• 2522 #CS: only 2 projection angles are supported (PX, PY, PZ). CNCelite 8058 / 8060 / 8065 / 8070
• 2523 #CS Pn: a point has 3 XYZ coordinates. CNCelite 8058 / 8060 / 8065 / 8070
• 2524 #CS Pn: more than 3 points have been programmed to define the plane. CNCelite 8058 / 8060 / 8065 / 8070
• 2525 #CS Pn: one of the XYZ coordinates is missing. CNCelite 8058 / 8060 / 8065 / 8070
• 2526 #CS: 2 of the projections (PX, PY, PZ) must be programmed. CNCelite 8058 / 8060 / 8065 / 8070
• 2527 #CS: P1 P2 and P3 must be different and not aligned. CNCelite 8058 / 8060 / 8065 / 8070
• 2528 #ORBIT: the pitch must be less than or equal to the diameter of the active tool. CNCelite 8058 / 8060 / 8065 / 8070
• 2529 Programming #ORBIT while radius compensation is active is not supported. CNCelite 8058 / 8060 / 8065 / 8070
• 2530 Changing the tool or corrector while #ORBIT is active is not supported. CNCelite 8058 / 8060 / 8065 / 8070
• 2531 Changing the main plane while #ORBIT is active is not supported. CNCelite 8058 / 8060 / 8065 / 8070
• 2532 Changing the active tool radius while #ORBIT is active is not supported. CNCelite 8058 / 8060 / 8065 / 8070
• 2533 #CS ON M3P is expected. CNCelite 8058 / 8060 / 8065 / 8070
• 2534 #ORBIT: the slot width and the feedrate must be greater than zero. CNCelite 8058 / 8060 / 8065 / 8070
• 2535 #KIN ID[]. KINTYPE of the selected kinematics cannot be 41, 42, 43 (C-axis kinematics). CNCelite 8058 / 8060 / 8065 / 8070
• 2536 #CYL of variable radius: the longitudinal axis cannot be a #GAPCTRL or #VIRTAX axis. CNCelite 8058 / 8060 / 8065 / 8070
• 2537 #VIRTAX: the virtual axis cannot be a main plane axis. CNCelite 8058 / 8060 / 8065 / 8070
• 2539 #BRKTURN . CNCelite 8058 / 8060 / 8065 / 8070
• 2540 #BRKTURN already active. CNCelite 8058 / 8060 / 8065 / 8070
• 2541 #BRKTURN: the oscillation frequency and amplitude must be greater than zero. CNCelite 8058 / 8060 / 8065 / 8070
• 2542 #PRGJUMP[etiqueta]/#PRGJUMP Netiqueta/#PRGJUMP OFF. CNCelite 8058 / 8060 / 8065 / 8070
• 2543 It is not possible to have both sentences active at the same time. CNCelite 8058 / 8060 / 8065 / 8070
• 2544 #GAPCTRL, #LEAP: the GAP3D, LEAP with a virtual axis needs #VIRTAX ON. CNCelite 8058 / 8060 / 8065 / 8070
• 2545 Program parameters W, B and K to (re)activate #ORBIT. CNCelite 8058 / 8060 / 8065 / 8070