Error 2526 · CNCelite 8058 / 8060 / 8065 / 8070
Message: #CS: 2 of the projections (PX, PY, PZ) must be programmed.
Detection
During block preparation.
Cause
One of the two mandatory parameters (PX, PY, PZ) is missing.
Solution
Check the program.
Message: #CS: 2 of the projections (PX, PY, PZ) must be programmed.
During block preparation.
One of the two mandatory parameters (PX, PY, PZ) is missing.
Check the program.
·
