Error 6028 · CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
Message: Error when accessing the RAM of the SERCON
Detection
On system startup or during execution.
Cause
Failure when testing the common RAM of the SERCON executed on CNC start-up (R/W accesses in Byte/Word modes). The CNC runs this test on power-up and in every cycle of the Sercos, during phase 4, to check the integrity of the data RAM memory of the SERCON.
Solution
Hardware problem on the Sercos piggy-back or in the connection to the PCI BUS Contact our technical service department.
