Error 5018 · CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
Message: CNCEX has not been executed because the communication mark is set to "1
Detection
When executing a CNCEX instruction.
Cause
The mark programmed in the CNCEX instruction is already active when executing the instruction. It may be because the instruction has been programmed wrong or because the channel is busy with another CNCEX instruction.
Solution
Check, in the PLC program, the logic of the CNCEX instruction and of the marks used.
