Error 4026 · CNCelite 8058 / 8060 / 8065 / 8070
Message: Inconsistent FeeDat/EnDat encoder data. A new configuration must be validated.
Detection
When initializing the Sercos bus; CNC start-up, validation of machine parameters and reset.
Cause
The data read from a FeeDat/EnDat encoder are different to those saved in the CNC.
The encoder is different to the validated during the setup.
Solution
Reconnect the encoder that was validated on setup or va 8058 80608065 8070 lidate the new encoder.
ꞏ173ꞏ
