CNC 8058 / 8060 / 8065 CNC 8070 CNCelite 8058 / 8060 / 8065 / 8070

Error 3735 · CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070

Message: Error when turning the PWM ON/OFF

Detection

During laser cutting (PWM).

Cause

The PWM parameters are set wrong.

Solution

Check the following conditions:

  • The value of parameter NLOCOUT must be 8.
  • The value of parameter PWMOUTPUT must not be higher than 2 (1, 2).

·