Error 3610 · CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
Message: The loop cannot be opened because it is in M19 or in synchronization
Detection
During execution.
Cause
A #SERVO OFF instruction is programmed but the loop cannot be opened because the spindle was at M19 before #SERVO ON.
Solution
The spindle is kept in a closed loop. The #SERVO OFF instruction cancels the #SERVO ON instruction and, if possible, opens the loop. If the spindle is in M19, the #SERVO OFF instruction cannot open the loop; to open the loop, program M3, M4, M5 or do a reset.
