Error 3103 · CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
Message: Target power insufficient for the proper operation using DMC.
Detection
During execution.
Cause
The values of the no-load power and the target power during machining are similar.
It is possible that the DMC cannot accurately distinguish the part inputs and outputs.
Solution
The target power (programmed or obtained by learning) must be at least 20% of the no-load power. In this case, it is recommended to deactivate the DMC function for this machining process. Programming a higher target power, which is not actually going to be achieved, can mean that the DMC never detects part inputs and performs all the machining as if the tool were working in a vacuum.
