CNC 8058 / 8060 / 8065 CNC 8070 CNCelite 8058 / 8060 / 8065 / 8070

Error 3067 · CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070

Message: G33/G34: 'Programming not allowed without a spindle being controlled in position

Detection

During execution.

Cause

The programmed function needs a spindle controlled in position. The CNC cannot control the spindle in position because the spindle does not have an encoder.

Solution

The spindle needs an encoder. Contact your supplier.

·