Error 3065 · CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
Message: The spindle turning speed programmed for G33 exceeds the encoder’s threshold
Detection
During execution.
Cause
The speed programmed for the G33/G34 function exceeded the threshold allowed by the encoder installed on the spindle. Exceeding the speed threshold of the encoder results in erroneous reading (counting) of the spindle feedback pulses.
Solution
The CNC does not permit executing the G33/G34 with the programmed speed because it cannot ensure that the validity of the thread. If the spindle has exceeded the threshold speed, the CNC needs to home the spindle in order to recover the position value.
