Error 3052 · CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
Message: The spindle status must be the same as the one at the time of the interruption
Detection
During execution.
Cause
After interrupting a program and changing to MHFS mode, the user tries to exit this mode while the spindle is in an M3, M4, M5 or M19 state different from the initial one.
Solution
Program a new spindle state change so it gets into the same state as before the interruption.
