CNC 8058 / 8060 / 8065 CNC 8070 CNCelite 8058 / 8060 / 8065 / 8070

Error 2413 · CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070

Message: DUTY/OUT must be programmed.

Detection

During editing and execution.

Cause

The command DUTY/OUT is not programmed for the function #PWRCTRL.

Solution

Check the syntax of the instruction in the programming manual. To activate the power control (#PWRCTRL), one of the commands DUTY or OUT must be programmed.

·