CNC 8058 / 8060 / 8065 CNC 8070 CNCelite 8058 / 8060 / 8065 / 8070

Error 2392 · CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070

Message: Linear zone: The lower limit must be smaller that than the upper limit for each axis

Detection

During block preparation.

Cause

The CNC has tried to enable a work zone where the lower limit of an axis is greater than the upper limit.

Solution

In a linear zone, the lower limit of the axis must be smaller than the upper limit. Change the lower limit (G120) or the higher limit (G121) of the axis. Checking is not carried out if the zone is disabled.

·