Error 2388 · CNCelite 8058 / 8060 / 8065 / 8070
Message: Invalid work zone status.
Detection
During block preparation.
Cause
The work zone status does not have the right value. There are 2 possibilities.
- The value programmed in G122 is wrong.
- The value restored after some data restoring process (startup, reset, tool inspection) is wrong.
Solution
Program the right value for the work zone; from 0 to 2.
- In the first case, program a correct value in parameter "E"of function G122.
- In the second case, write from the PLC the right value in the variable "G.ZONEST[zone]".
CNCelite 8058 80608065 8070
