CNC 8058 / 8060 / 8065 CNC 8070 CNCelite 8058 / 8060 / 8065 / 8070

Error 1962 · CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070

Message: Wrong roughing penetration angle

Detection

During the execution of the cycle.

Cause

The roughing penetration angle is not between 0º and 90º.

Solution

Correct the penetration angle; program a value between 0º and 90º.

·