Error 5014 · CNC 8055 M · CNC 8055 T
Message: Mains voltage
Effect
It stops the movement of the axes and the spindle, eliminating all the enable signals and canceling all the analog outputs of the CNC. When detected from the position loop, it opens the position loop and sets the LOPEN mark to ·1·.
If it is in execution, it interrupts the execution of the part program of the CNC of all channels.
Besides this, it activates the external emergency output.
Cause
An output power supply failure has been detected at the indicated node; it has no power or it is under +24V.
Solution
Check the supply voltage at the outputs and the consumption of the module’s supply voltage.
