All codes (4.799)

• 1034 S" has been programmed, but no gear is active. CNC 8055 M · CNC 8055 T
• 1035 #SLOPE: parameter out of range CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 1035 Programmed "S" too high CNC 8055 M · CNC 8055 T
• 1036 S" has not been programmed in G95 or in threading CNC 8055 M · CNC 8055 T
• 1037 Center coordinates ignored with G0/G1/G100/G63 active CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 1037 No "S" has been programmed for G96. CNC 8055 T
• 1038 Radius compensation cannot be active while measuring CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 1038 The spindle has not been oriented CNC 8055 T
• 1038 The spindle has not been oriented CNC 8055 M
• 1039 No "F" has been programmed in G94. CNC 8055 T
• 1039 There is a previous measurement value for the axis (axes) CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 1040 Canned cycle does not exist CNC 8055 M · CNC 8055 T
• 1040 Home search not allowed on an axis in G201 CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 1041 Corrected circular path center out of range CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 1041 Mandatory parameter missing in canned cycle CNC 8055 M
• 1042 Wrong parameter value in canned cycle CNC 8055 T
• 1042 Wrong parameter value in canned cycle CNC 8055 M
• 1043 The third axis of the plane cannot be the same as the first or the second one CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 1043 Wrong depth profile in pocket with islands. CNC 8055 M
• 1043 Wrong tool for programmed profile. CNC 8055 T
• 1044 A profile has been programmed that intersects itself. CNC 8055 T
• 1044 Plane profile intersects itself in a pocket with islands CNC 8055 M
• 1044 The first and second axis of the plane cannot be the same CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 1045 Error when programming a drilling operation in a pocket with islands. CNC 8055 M
• 1045 The first axis of the plane has been programmed wrong CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 1045 Wrong cutter geometry angle. CNC 8055 T
• 1046 The second axis of the plane has been programmed wrong CNC 8058 / 8060 / 8065 · CNC 8070
• 1046 The second axis of the plane has been programmed wrong CNCelite 8058 / 8060 / 8065 / 8070
• 1046 Wrong tool position before the canned cycle CNC 8055 T
• 1046 Wrong tool position before the canned cycle CNC 8055 M