CNC 8058 / 8060 / 8065 CNC 8070 CNCelite 8058 / 8060 / 8065 / 8070

Error 3037 · CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070

Message: Axis locked up

Detection

During execution.

Cause

The CNC tries to move an axis, but the PLC has set the signal SERVO(axis)ON.

Solution

Check the treatment of the SERVO(axis)ON signal in the PLC program or increase the value of the DWELL parameter of the axis. The CNC can issue this error when it works on block blending (G50, G5 or HSC) and it is necessary to force the axis stop (with an M or G7) before moving the "dead" axis.

·