Error 6004 · CNC 8070
Message: Error when initializing the BUS CAN
Detection
During CNC startup.
Cause
Error when initializing the CAN on PC start-up in order to start the CAN keyboard.
The error codes being are different for the CANfagor bus and for the CANopen bus.
Error codes for the CANopen bus.
14 Failure when resetting the micro-processor of the COMPCI (poor microprocessor performance, bad contacts, etc.).
15 Problems in the connection or configuration of the CANopen slaves.
ꞏ183ꞏ Error codes for the CANfagor bus.
Solution
If the error persists, contact the Service Department.
- 1 / -2 / -3 165 in an error state or does not respond (problem in the COMPCI).
