Error 6008 · CNC 8058 / 8060 / 8065 · CNC 8070
Message: Watchdog in the PC + COMPCI
Detection
During execution.
Cause
The COMPCI and the PC do not respond due to poor performance, bad contacts, losses of RT IT, etc.
Solution
Check in diagnosis mode the CAN bus configuration and whether there are IT losses.
If the error persists, contact the Service Department.
Code. Meaning.
- 1 / -6 More than three nodes lost.
- 3 1 node lost.
- 4 2 node lost.-5 3 node lost.
2 Timeout (the node does not respond).3 Toggle bit error.
4 The node responds, but its state is not right.
ꞏ184ꞏ
