CNC 8058 / 8060 / 8065 CNC 8070

Error 3714 · CNC 8058 / 8060 / 8065 · CNC 8070

Message: Gantry or tandem axes cannot be parked, nor axes enabled with DRENA or SPENA

Detection

When parking an axis or spindle from the PLC.

Cause

The PLC tries to park an axis of a gantry pair or an axis or spindle of a tandem pair, or an axis enabled (DRENA/SPENA).

Solution

The possible solutions are:

  • The gantry or tandem axes cannot be parked, neither from the PLC nor from the CNC. Eliminate the signal for parking the axis or spindle from the PLC.
  • Disable the axis before parking it (DRENA/SPENA signals).

The same code on other products

·