Error 4097 · CNC 8055 M · CNC 8055 T
Message: ERROR 600: Communication error with the second feedback
Detection
During execution.
Effect
It stops the movement of the axes and the spindle, eliminating all the enable signals and canceling all the analog outputs of the CNC. When detected from the position loop, it opens the position loop and sets the LOPEN mark to ·1·.
If it is in execution, it interrupts the execution of the part program of the CNC of all Besides this, it activates the external emergency output.
Cause
An error occurred at the drive.
Solution
Refer to the drive manual.
