Error 2016 · CNC 8055 M · CNC 8055 T
Message: The PLC is not ready.
Detection
During execution.
Effect
It stops the movement of the axes and the spindle, eliminating all the enable signals and canceling all the analog outputs of the CNC. When detected from the position loop, it opens the position loop and sets the LOPEN mark to ·1·.
If it is in execution, it interrupts the execution of the part program of the CNC of its Besides this, it activates the external emergency output.
Cause
The PLC program is not running. These may be the probable causes:
The PLC program is missing. WATCHDOG error. The program has been interrupted from monitoring.
Solution
Start the PLC program. (Restart the PLC).
