Error 2015 · CNC 8055 M · CNC 8055 T
Message: There is no voltage at the I/O 3 board.
Detection
During execution.
Effect
It stops the movement of the axes and the spindle, eliminating all the enable signals and canceling all the analog outputs of the CNC. When detected from the position loop, it opens the position loop and sets the LOPEN mark to ·1·.
If it is in execution, it interrupts the execution of the part program of the CNC of its channel.
Besides this, it activates the external emergency output.
Cause
24V are missing at the output supply of the corresponding I/O board. The fuse may be blown.
Solution
Power the outputs of the corresponding I/O board (24v). If the fuse is blown, replace it.
