Error 2000 · CNC 8055 M · CNC 8055 T
Message: External emergency activated.
Detection
During execution.
Effect
It stops the movement of the axes and the spindle, eliminating all the enable signals and canceling all the analog outputs of the CNC. When detected from the position loop, it opens the position loop and sets the LOPEN mark to ·1·.
If it is in execution, it interrupts the execution of the part program of the CNC of its channel.
Cause
PLC input I1 is set to "0" (maybe the E-stop button) or the PLC mark M5000(/EMERGEN) is set to "0".
Solution
Check at the PLC why the inputs are at "0". (Possible lack of power).
