Error 1214 · CNC 8055 T
Message: W axis servo error
Effect
It stops the movement of the axes and the spindle, eliminating all the enable signals and canceling all the analog outputs of the CNC. When detected from the position loop, it opens the position loop and sets the LOPEN mark to ·1·.
If it is in execution, it interrupts the execution of the part program of the CNC of its channel.
Besides this, it activates the external emergency output.
Cause
The real feedrate of the axis, after the time indicated by axis parameter FBALTIME(P12), is below 50% or over 200% of the one programmed.
