Error 1208 · CNC 8055 M · CNC 8055 T
Message: C axis travel limits exceeded
Detection
During execution.
Effect
It stops the movement of the axes and the spindle, eliminating all the enable signals and canceling all the analog outputs of the CNC. When detected from the position loop, it opens the position loop and sets the LOPEN mark to ·1·.
If it is in execution, it interrupts the execution of the part program of the CNC of its channel.
Cause
An attempt has been made to exceed the physical travel limits. As a result, the PLC activates the axis mark "LIMIT+1" or "LIMIT-1".
