Error 1100 · CNC 8055 M · CNC 8055 T
Message: Travel limits of spindle 1 exceeded
Detection
During execution.
Effect
It stops the movement of the axes and the spindle, eliminating all the enable signals and canceling all the analog outputs of the CNC. When detected from the position loop, it opens the position loop and sets the LOPEN mark to ·1·.
If it is in execution, it interrupts the execution of the part program of the CNC of its
Cause
An attempt has been made to exceed the physical turning limits of the spindle. As a result, the PLC activates the spindle mark "LIMIT+S" or "LIMIT-S". ("LIMIT+S2" or"LIMIT-S2" when working with the second spindle).
