Error 1087 · CNC 8055 T
Message: Circle with zero radius
Detection
During execution.
Cause
The possible causes are:
- When programming an arc using "G02/G03 X Z I K", an arc has been programmed with a zero radius.
- When operating with tool radius compensation, an inside arc has been programmed with the same radius as that of the tool.
Solution
The solution for each cause is:
- Arcs with zero radius are not allowed. Program a radius other than zero.
- When working with tool radius compensation, the arc radius must larger than that of the tool. Otherwise, the tool cannot machine the programmed path (because to do so, the tool would have to make an arc of zero radius).
