Error 5006 · CNC 8055 M
Message: Error because the node has been reset
Effect
It stops the movement of the axes and the spindle, eliminating all the enable signals and canceling all the analog outputs of the CNC. When detected from the position loop, it opens the position loop and sets the LOPEN mark to ·1·.
If it is in execution, it interrupts the execution of the part program of the CNC of all Besides this, it activates the external emergency output.
Cause
The node has been reset due to a power supply failure.
Solution
Check the power supply voltage at the indicated node, the ground connection and the load of the outputs.
