All codes (3.093)

• 2496 Unknown command. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 2497 Only one command is allowed to be programmed. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 2498 The programmed gap must be greater than the machine parameter GAPSMINLEVEL. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 2499 GAP simulation is not possible with parameter SIMMODE = FALSE. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 2500 Rotary axis movement not permitted with RTCP STATIC active and radius compensation active (G41/G42). CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 2501 It is not possible to program in the same linear and rotary axis block with RTCP STATIC active. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 2502 Rotational axis movement not permitted, in inspection, with RTCP STATIC active. CNCelite 8058 / 8060 / 8065 / 8070
• 2503 G36/37/38/39: The radius is programmed with I. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 2504 G107: The second point (XYZ) has yet to be programmed. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 2505 G107: The first point (IJK) has yet to be programmed. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 2506 G107 incompatible with G106 and #SPLINE ON. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 2507 G107: RQ polar coordinates or Cartesian coordinate/angle (X..ZQ) that is not allowed. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 2508 Write value out of range. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 2509 #ORBIT ON<[Wanchura, Bpaso, Ksentido ]> CNCelite 8058 / 8060 / 8065 / 8070
• 2510 #ORBIT OFF. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 2511 Parameter ORBIT out of range. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 2512 #ORBIT: the width of the slot must be greater than the diameter and less than or equal to twice the diameter of the active tool. CNCelite 8058 / 8060 / 8065 / 8070
• 2513 #ORBIT ON now active. CNCelite 8058 / 8060 / 8065 / 8070
• 2514 #ORBIT ON: movement in G0 not allowed. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
• 2515 #ORBIT ON: movement of the axis perpendicular to the plane not allowed. CNCelite 8058 / 8060 / 8065 / 8070
• 2516 #CSn: ON/SAVE is expected. CNCelite 8058 / 8060 / 8065 / 8070
• 2517 #CS M3P: one of the points that define the plane has not been programmed (#CS P1..3). CNCelite 8058 / 8060 / 8065 / 8070
• 2518 #CS: valid tokens beginning with 'A', ALIGNX, ALIGNY. CNCelite 8058 / 8060 / 8065 / 8070
• 2519 #CS: valid token beginning with 'S', SOL2. CNCelite 8058 / 8060 / 8065 / 8070
• 2520 #CS: old syntax "#CS [MODE" not compatible with new syntax "#CS ON/ADD XYZ..". CNCelite 8058 / 8060 / 8065 / 8070
• 2521 #CS: only allows 3 rotations (RX, RY, RZ). CNCelite 8058 / 8060 / 8065 / 8070
• 2522 #CS: only 2 projection angles are supported (PX, PY, PZ). CNCelite 8058 / 8060 / 8065 / 8070
• 2523 #CS Pn: a point has 3 XYZ coordinates. CNCelite 8058 / 8060 / 8065 / 8070
• 2524 #CS Pn: more than 3 points have been programmed to define the plane. CNCelite 8058 / 8060 / 8065 / 8070
• 2525 #CS Pn: one of the XYZ coordinates is missing. CNCelite 8058 / 8060 / 8065 / 8070