CNC 8055 M error codes
Look up an error or alarm code from your Fagor CNC, drive or digital readout and see its cause and solution, with a link to the page in the manual.
All codes (895)
- 0240 Do not activate the "C" axis while the spindles are synchronized CNC 8055 M · CNC 8055 T
- 0241 Don’t program G77 S, G78 S with no spindle encoder CNC 8055 M
- 0242 Do not synchronize spindles with M19TYPE=0 CNC 8055 M · CNC 8055 T
- 0246 The feedrate cannot be negative or zero. CNC 8055 M · CNC 8055 T
- 1000 There is no enough path information. CNC 8055 M · CNC 8055 T
- 1001 Plane change in rounding/chamfering. CNC 8055 M · CNC 8055 T
- 1002 Rounding radius too large. CNC 8055 M · CNC 8055 T
- 1003 Rounding in last block. CNC 8055 M · CNC 8055 T
- 1004 Tangential output programmed wrong CNC 8055 M · CNC 8055 T
- 1005 Chamfer programmed wrong. CNC 8055 M · CNC 8055 T
- 1006 Chamfer value too large. CNC 8055 M · CNC 8055 T
- 1007 G8 defined wrong. CNC 8055 M · CNC 8055 T
- 1008 There is no information about the previous path CNC 8055 M · CNC 8055 T
- 1009 There is no information for tangent arc in pockets with islands. CNC 8055 M
- 1010 Wrong plane for tangent path. CNC 8055 M · CNC 8055 T
- 1011 Jog movement out of limits. CNC 8055 M
- 1012 G48 cannot be programmed while G43 is active CNC 8055 M
- 1013 G43 cannot be programmed with G48 active CNC 8055 M
- 1014 G49 cannot be programmed if it’’s already active CNC 8055 M
- 1015 The tool is not defined in the tool table CNC 8055 M · CNC 8055 T
- 1016 The tool is not in the tool magazine CNC 8055 M · CNC 8055 T
- 1017 There is no empty pocket in the tool magazine CNC 8055 M · CNC 8055 T
- 1018 A tool change has been programmed without M06 CNC 8055 M · CNC 8055 T
- 1019 There is no tool of the same family for replacement. CNC 8055 M · CNC 8055 T
- 1020 Do not change the active or pending tool using high level language. CNC 8055 M · CNC 8055 T
- 1021 No tool offset has been programmed in the canned cycle. CNC 8055 M · CNC 8055 T
- 1023 G67. Tool radius too large. CNC 8055 M
- 1024 G68. Tool radius too large. CNC 8055 M
- 1025 A tool with no radius has been programmed CNC 8055 M
- 1026 A step has been programmed that is larger than the tool diameter CNC 8055 M
Log in to download
New to the platform?
Create an account
·
