All codes (895)

• 0165 Password: utilizar letras (mayúsculas o minúsculas) o dígitos. CNC 8055 M
• 0166 Only one HIRTH axis per block is allowed. CNC 8055 M · CNC 8055 T
• 0167 Rot. axis position.: absolute values (G90) within 0-359.9999. CNC 8055 M · CNC 8055 T
• 0168 Rotary axis: absolute values (G90) within +/-359.9999. CNC 8055 M · CNC 8055 T
• 0169 Modal subroutines cannot be programmed. CNC 8055 M · CNC 8055 T
• 0171 The window must be previously defined. CNC 8055 M · CNC 8055 T
• 0172 The program is not accessible CNC 8055 M
• 0174 Circular (helical) interpolation not possible. CNC 8055 M · CNC 8055 T
• 0175 Analog inputs: ANAI(1-8) = +/-5 Volts. CNC 8055 M · CNC 8055 T
• 0176 Analog outputs: ANAO(1-8) = +/-10 Volts. CNC 8055 M · CNC 8055 T
• 0178 G96 only possible with analog spindle. CNC 8055 M
• 0179 Do not program more than 4 axes simultaneously. CNC 8055 M
• 0180 Program DNC1/2/E, HD or CARD A (optional). CNC 8055 M · CNC 8055 T
• 0181 Program A (append) or D (delete). CNC 8055 M · CNC 8055 T
• 0182 Option not available. CNC 8055 M · CNC 8055 T
• 0183 Cycle does not exist. CNC 8055 M
• 0185 Tool offset does not exist CNC 8055 M
• 0188 Function not possible from PLC. CNC 8055 M · CNC 8055 T
• 0190 Programming not allowed while in tracing mode. CNC 8055 M
• 0191 Do not program tracing axes. CNC 8055 M
• 0192 Incorrect active plane and longitudinal axis. CNC 8055 M
• 0193 G23 has not been programmed. CNC 8055 M
• 0194 Repositioning not allowed. CNC 8055 M · CNC 8055 T
• 0195 Axes X, Y or Z slaved or synchronized. CNC 8055 M
• 0196 Axes X, Y and Z must exist. CNC 8055 M
• 0198 Deflection out of range. CNC 8055 M
• 0199 Rotary axis preset: values between 0 and 359.9999. CNC 8055 M · CNC 8055 T
• 0200 Program: G52 axis +/-5.5 CNC 8055 M · CNC 8055 T
• 0201 Program only one positioning axis in G01. CNC 8055 M
• 0202 Program G27 only when tracing a profile. CNC 8055 M