Error 7029 · CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
Message: The operation cannot be carried out: Error at the tool manager
Detection
During execution.
Cause
Magazine in emergency state. The PLC has activated an invalid mark of the maneuver, the PLC has activated the SETTMEM mark or there is an error in the maneuver.
Solution
Correct the tool change maneuver in the PLC program. If the PLC has activated the SETTMEM mark, check why the PLC has set the emergency signal.
