Error 6033 · CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
Message: The hardware configuration does not match that saved in the file
Detection
On system startup or during execution.
Cause
The hardware configuration saved in the disk is not the same as the one detected on start-up. Possible changes in the CAN configuration that have not been saved, undesired changes in the machine parameters, etc.
Solution
In diagnosis mode, verify that the detected CAN configuration coincides with the real one; if not, save the configuration. Otherwise, check whether the parameters have been set wrong or there is an error in the detection of the nodes.
