CNC 8058 / 8060 / 8065 CNC 8070 CNCelite 8058 / 8060 / 8065 / 8070

Error 3808 · CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070

Message: The axis does not exist or is not available

Detection

During execution.

Cause

The possible causes are:

  • The axis was not in jog mode when quitting that mode.
  • The CNC has detected function G101 or G102 for the slave axis of a gantry pair.
  • Invalid axis name in the #TANGCTRL ON instruction.

Solution

The possible solutions are:

  • Press reset to exit the jog mode. • Functions G101 and G102 must be programmed for the master axis of the gantry axis.
  • Check the programming of the #TANGCTRL ON instruction.

·