Error 3741 · CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
Message: #GAPCTRL: out of range [GAPMAX - GAPMIN].
Detection
During execution.
Cause
The gap has exceeded the maximum or minimum allowed values set by GAPMAX or GAPMIN. It is possible that the sensor is not reading correctly.
Solution
Check the program. Change the parameter value of GAPERRORCANCEL so that the CNC does not prompt an error.
