Error 2128 · CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
Message: Helical path programmed wrong
Detection
During execution.
Cause
Either one of the parameters of the helical path is missing or is wrong. The pitch has been programmed, but not the depth, both the pitch and the end point are missing or the depth, the pitch and the end point are not compatible with each other.
Solution
Program the end point compatible with the pitch and the depth. If the helical path makes full turns, program the pitch and the depth.
