Error 2101 · CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
Message: Negative software limit overrun in G5, G60 or HSC
Detection
During execution.
Cause
The path generated by the CNC in G05, G60 or HSC mode is beyond the active travel limits.
Solution
Check that the programmed path is within the software limits and execute it in G7 or G50 to avoid overshooting. If necessary, cancel the HSC mode (#HSC OFF).
