Error 2008 · CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
Message: While G138 is active, no G41/G42 change is allowed after the first compensation block
Detection
During execution.
Cause
After activating tool radius compensation with the direct method (G138), a change of compensation type (from G41 to G42 or vice versa) has been programmed before the first motion block.
Solution
To activate tool radius compensation with the direct method (G138), the CNC needs an additional block in the plane besides the activation block. The CNC allows changing the type of tool radius compensation after this movement. If this block cannot be programmed, use the indirect method (G139) to activate tool radius compensation.
