All codes (895)

• 1027 A tool cannot be programmed with G48 active. CNC 8055 M
• 1028 Do not switch axes over while G23, G48 or G49 is active CNC 8055 M
• 1029 Do not swap axes that are already swapped. CNC 8055 M · CNC 8055 T
• 1030 The "M" for the automatic gear change does not fit. CNC 8055 M
• 1031 No subroutine is allowed with automatic gear change. CNC 8055 M · CNC 8055 T
• 1032 Spindle gear not defined in M19. CNC 8055 M · CNC 8055 T
• 1033 Wrong gear change. CNC 8055 M
• 1034 S" has been programmed, but no gear is active. CNC 8055 M · CNC 8055 T
• 1035 Programmed "S" too high CNC 8055 M · CNC 8055 T
• 1036 S" has not been programmed in G95 or in threading CNC 8055 M · CNC 8055 T
• 1038 The spindle has not been oriented CNC 8055 M
• 1040 Canned cycle does not exist CNC 8055 M · CNC 8055 T
• 1041 Mandatory parameter missing in canned cycle CNC 8055 M
• 1042 Wrong parameter value in canned cycle CNC 8055 M
• 1043 Wrong depth profile in pocket with islands. CNC 8055 M
• 1044 Plane profile intersects itself in a pocket with islands CNC 8055 M
• 1045 Error when programming a drilling operation in a pocket with islands. CNC 8055 M
• 1046 Wrong tool position before the canned cycle CNC 8055 M
• 1047 Open plane profile in pocket with islands CNC 8055 M
• 1048 Part surface coordinate not programmed in pocket with islands CNC 8055 M
• 1049 Wrong reference plane coordinate in canned cycle CNC 8055 M
• 1050 Wrong value to be assigned to a variable CNC 8055 M · CNC 8055 T
• 1051 Wrong access to PLC variables. CNC 8055 M
• 1052 Access to a variable with wrong index CNC 8055 M · CNC 8055 T
• 1053 Local parameters not accessible CNC 8055 M · CNC 8055 T
• 1054 Limit of local parameters exceeded CNC 8055 M
• 1055 Nesting exceeded CNC 8055 M
• 1056 RET not associated with subroutine. CNC 8055 M · CNC 8055 T
• 1057 Undefined subroutine CNC 8055 M
• 1058 Undefined probing canned cycle CNC 8055 M