Error 2053 · CNC 8055 M · CNC 8055 T
Message: Error at the CNC parameters.
Detection
During execution.
Effect
It stops the movement of the axes and the spindle, eliminating all the enable signals and canceling all the analog outputs of the CNC. When detected from the position loop, it opens the position loop and sets the LOPEN mark to ·1·.
If it is in execution, it interrupts the execution of the part program of the CNC of its Besides this, it activates the external emergency output.
Cause
A wrong value of some parameter has been detected on system start-up. The CNC indicates which parameter has the wrong value.
Solution
Assign the right value to the parameter indicated by the CNC.
PLC ERRORS
