Error 2026 · CNC 8055 M · CNC 8055 T
Message: Probe’s maximum travel limit overrun.
Detection
During execution.
Effect
It stops the movement of the axes and the spindle, eliminating all the enable signals and canceling all the analog outputs of the CNC. When detected from the position loop, it opens the position loop and sets the LOPEN mark to ·1·.
If it is in execution, it interrupts the execution of the part program of the CNC of its channel.
Besides this, it activates the external emergency output.
Cause
The probe has exceeded the maximum deflection allowed by machine parameter.
Solution
Decrease the feedrate and check that the probe has not been damaged.
