Error 1157 · CNC 8055 M · CNC 8055 T
Message: Maximum Z axis software exceeded
Detection
During execution.
Effect
It stops the movement of the axes and the spindle, eliminating all the enable signals and canceling all the analog outputs of the CNC. When detected from the position loop, it opens the position loop and sets the LOPEN mark to ·1·.
If it is in execution, it interrupts the execution of the part program of the CNC of its
Cause
A coordinate has been programmed that is out of the limits defined by axis parameters LIMIT+(P5) and LIMIT-(P6).
